Large Platform Fiber Laser Cutting Machine


This model is with large platform and designed for large-size metal fabrication, inlcuding stainless steel, carbon steel, mild steel, aluminum, galvanized sheet, iron and so on. To deal with large metal plates effectively, it is of much higher power from 3000w-12000w.  It is of open-type with simple structure, convinient maintenance, low operating cost and complete service and support.

Ultra-large Cutting Area

The maximum cutting area is 14000*3500mm, which can easily realize the overall processing of oversized workpieces and the fast and accurate cutting of metal plates, which can meet more cutting needs.


Modular Design Worktable

The platform blade adopts the modular design, the bottom of the platform adopts an integrated waste collection device, which is easy to disassemble, easy to clean up the residue and scrap, and reduce the replacement cost.

Stable Anti-burning Welded Body

The high-strength steel plate welded body adopts the groove welding process to realize equal-strength welding between the steel plates. 

The mechanical properties of the welded interface (especially the tensile strength) are the same as the base material. The bed has undergone internal stress annealing treatment and spontaneous combustion aging treatment to ensure that the bed is firm and durable with zero deformation.

Beam Safety Light Curtain

Light curtains are installed on the front and back sides of the beam to provide 360° full protection, waterproof, dustproof, anti-interference, high sensitivity, and strong reliability. The safety protection can be opened with one button to ensure the safety of workers when the machine is working normally.

Intelligent Partition Dust Removal

The ventilation area, divided into left and right zone, is equipped with a butterfly valve damper to ensure strong and intensive suction. It is noiseless while opening and closing. Due to the 300*300mm large-caliber pipeline on both sides of the machine bed, the cutting smoke will be discharged smoothly. The machine bed is always full of positive pressure, and in combination with a strong ventilation system below, the smoke produced by cutting can be filtrated inside to ensure environmental protection. The smoke exhaust device automatically senses the laser cutting position and turns on the smoke exhaust precisely. Follow-up smoking exhaustion, create a concealed cavity to fully control smoke diffusion.

Auto-Focus Laser Cutting Head

The auto-focus cutting head can adjust its focal point automatically according to material thickness, and apply to multiple focal lengths with no manual regulation, less errors or faults. It will shorten punching duration, improve punching quality and save time by high-speed cutting. Flexible and fast, the cutting head can avoid collision, automatic edge finding and can reduce sheet waste with large clear aperture. Its built-in double water-cooling structure can also help to prolong the service life of lenses.

Smart Control System

The new vertical 21-inch touch screen will make the control more easy and convenient. 10-touch points ensures more operation accuracy and reduce retardance. CypCut cutting software is a set of software specially developed for the deep customization of the laser cutting industry, which is easy to use, rich in functions and suitable for various processing occasions.

High-Precision Transmission System


Active Anti-collision Function

Equipped with auto-tracking modules, it can perceive the surroundings to avoid obstacles intelligently.
The cutting head always keeps a safe distance from the cutting surface and has the touch stop function to reduce the risk of collision and accident, in this way to effectively reduce the damage rate of laser heads and help you save maintenance cost.

Anti-Flutter Cutting of Edge

Capable of cutting edges of thin sheets with no quivering marks. Flying cutting micro-connection prevents sheet upwarp.
Equipped with a gas-saving and stable flow nozzle, it supports lightning punching to guarantee high speed and high stability cutting.

Simple Operation, User-friendly

Wifi Remote Control

Interconnection between different devices to make easy data transmission. 
Remote control system helps to resolve machine operation abnormality to guarantee continuous working efficiency.


Handle Operation Control

Magnetic design, take and put at any time.
The handle allows you to operate the machine at close range and control the machine at different angles, which makes it easier to operate.
One button wireless control to realize calibration, blowing, simulation, cutting, pause, etc.


Limit Switch Protection

Automatically monitor the range of operation of crossbeam and cutting parts.
Equipped with both hard and soft limit switches to greatly improve operational safety.



Intelligent Warning System

Give alarm if any abnormality and conduct self-inspection. The main interface gives an abnormality alarm to improving the efficiency of equipment abnormal troubleshooting. 
Reduce hidden dangers to save maintenance costs.
Regular maintenance reminders to extend the machine service life.



Auto-lubrication System

The time and frequency of lubrication can be adjusted through the central control system. It can conduct comprehensive and multi-point lubrication for guide rails, sliders, screws, racks, etc., and automatically gather waste lubricating fluid, which ensures the high working efficiency.
With lubrication abnormality alarm and low liquid level alarm functions to help maintain the cutter, the transmission mechanism will provide longer services with high cutting accuracy.

High-speed Cutting Database

High-quality cutting design database to help material processing;
To realize high-quality thick plate cutting as well as to double the speed.
Adjust cutting gas pressure automatically to reduce the use cost, and realize high-speed and high-precision cutting.




Technical Parameter

Model G Series

Working Area (L*W)
10000*2500mm/ 12000*2500mm/ 14000*3500mm
Laser Power
3000w/ 4000w/ 6000w/ 8000w/ 10000w/ 12000w
X/Y Axis Positioning Accuracy 0.05mm
X/Y Axis Repositioning Accuracy 0.03mm
Max. Linkage Speed 100m/min
Max. Acceleration 1.5G
*The above data are for reference only, subject to the actual product!



Un message

Related Products

Laser Cutting Machine

Laser Welding Machine

Laser Cleaning Machine

About Disen

Contact Us

E-mail: sales@disenlaser.com
Mobile: +86-15588876781
Tel: +86-531-67800092

* Owing to the real-time updating of products and technologies, the datas and product pictures on the site are for reference only

Copyright © 2015 Jinan Disen Laser Machinery Co., Ltd.